American Specialties 0361 Automatic Liquid Dispenser - Refillable 

White, high impact plastic, proximity sensor, battery operated. Tamper resistant soap level viewing window, swing open body with special lock and key. Capacity: 28 fluid ounces (800 ml)

Specification
Surface Mounted Automatic Liquid Soap Dispenser shall hold and dispense up to 800 ml (27 oz) of liquid and lotion soaps, synthetic detergents and antibacterial soaps containing PCMX and/or Triclosan with a viscosity range of between 5 and 3500 mPa s or cP (MilliPascal-sec or Centipoise). Dispenser body shall be molded of white high impact plastic. Dispenser shall be powered by either one (1) 9 V or six (6) AA-size (1.5 V) batteries (not supplied) and shall operate automatically from IR sensor that shall activate soap dispensing when hands are placed in sensor zone. Sensor detection range shall be adjustable by owner. Dispenser shall have two (2) soap dosage settings and shall pump either of two preset ranges of .02 ± .01 fl oz or .04 ± .01 fl oz (.5 ml to .7 ml or 1 ml to 1.4 ml) of soap during each activation. A tamper resistant soap level-viewing window shall be provided. Unit shall have a swing open body secured with side-mounted lock that is opened with special key provided.

Installation
Install unit on wall or partition surface with four (4) No 8 screws (by others). Recommended installation for general utility is 42" (1067) to 46" (1168) AFF and 10" (254) minimum above washbasin or countertop. A mounting template is provided.

Operation
Soap is automatically dispensed when hands are placed in sensor zone. Owner sets soap dosage range manually inside housing. Unit is reloaded by unlocking lock with special key (supplied), swinging open dispenser body and removing and refilling internal soap container. Soap dispenser will continue to feed properly until empty. Tank supply is replenished manually on cycle determined by maintenance needs. A complete instruction manual is provided with each unit.

Overall Size
3 5/8" x 10 5/16" x 4 3/8" (92 x 262 x 111 mm) projection.

PRODUCT OVERVIEW

Product Overview
White, hh impact plastic, proximity sensor, battery operated. Tamper resistant soap level viewing window, swing open body with special lock and key. Capacity: 28 fluid ounces (800 ml)

Specificat
Surface Mounted Automatic Liquid Soap Dispenser shall hold and dispense up to 800 ml (27 oz) of liquid and lotion soaps, synthetic detergents and antibacterial soaps containing PCMX and/or Triclosan with a viscosity range of between 5 and 3500 mPa s or cP (MilliPascal-sec or Centipoise). Dispenser body shall be molded of white high impact plastic. Dispenser shall be powered by either one (1) 9 V or six (6) AA-size (1.5 V) batteries (not supplied) and shall operate automatically from IR sensor that shall activate soap dispensing when hands are placed in sensor zone. Sensor detection range shall be adjustable by owner. Dispenser shall have two (2) soap dosage settings and shall pump either of two preset ranges of .02 ± .01 fl oz or .04 ± .01 fl oz (.5 ml to .7 ml or 1 ml to 1.4 ml) of soap during each activation. A tamper resistant soap level-viewing window shall be provided. Unit shall have a swing open body secured with side-mounted lock that is opened with special key provided.

Installation
Install unit on wall or partition surface with four (4) No 8 screws (by others). Recommended installation for general utility is 42" (1067) to 46" (1168) AFF and 10" (254) minimum above washbasin or countertop. A mounting template is provided.

Operation
Soap is automatically dispensed when hands are placed in sensor zone. Owner sets soap dosage range manually inside housing. Unit is reloaded by unlocking lock with special key (supplied), swinging open dispenser body and removing and refilling internal soap container. Soap dispenser will continue to feed properly until empty. Tank supply is replenished manually on cycle determined by maintenance needs. A complete instruction manual is provided with each unit.

Overall Size
3 5/8" x 10 5/16" x 4 3/8" (92 x 262 x 111 mm) projection.

TECHNICAL SPECIFICS