Channel Frame Mirror - 0620 Stainless Steel Frame Commercial Restroom Mirror
$80.15
Product Type : Washroom Accessories
Vendor : Washroom Accessories
SKU : HDM-ASI-M0620
ATTN: All Mirrors are subject to additional shipping charges. This is a quote by quote basis. PRODUCT OVERVIEW Channel Frame Mirrors have a one piece, roll-formed, 20 gauge, type 304 satin finish stainless steel channel frame with tightly mitered corners. Select float glass mirror shall be guaranteed for 15 years...
ATTN: All Mirrors are subject to additional shipping charges. This is a quote by quote basis.
PRODUCT OVERVIEW
Channel Frame Mirrors have a one piece, roll-formed, 20 gauge, type 304 satin finish stainless steel channel frame with tightly mitered corners. Select float glass mirror shall be guaranteed for 15 years against silver spoilage. 1/2" x 1/2" x 1/2" (13 x 13 x 13 mm) 20 gauge type 304 satin finish stainless steel channel is a one piece roll formed member that encases mirror and backing revealing a tight mitered corner. Mirror is installed on two wall brackets and held secure by theft resistant screw.All Mirrors are subject to additional shipping charges. This is a quote by quote basis.
COMPONENTS AND MATERIALS
Installation
Install “H” wall brackets level and plumb per diagram location using ONLY No 8 or No 10 Pan Head screws (by others). Hang mirror on brackets and tighten locking screw (No 6-32F x 3/4" Philips Pan Head, supplied separately taped to mirror back) at bottom (note: this screw should be started prior to hanging mirror on wall bracket). For compliance with ADA Accessibility Guidelines, bottom edge of reflecting surface should be no higher than 40"(1016mm) above finished floor.
SPECIFICATIONS
Channel Frame Mirrors shall have frame fabricated of alloy 18-8 stainless steel, type 304, 20 gauge with mitered corners. Mirror glazing shall be warranted for 15 years against silver spoilage. All edges of mirror shall be protected by friction and chafe absorbing fillers. Back of mirror shall be protected by full size shock-absorbing water-resistant filler and full size one piece 20 gauge corrosion protected steel. Top and bottom wall mounting brackets shall be fabricated of 20 gauge corrosion protected steel and shall be spot welded into “H” hanger. Mirror shall be secured to lower bracket with a Phil- lips Pan Head locking screw.
Tech Data SheetRelated Products
