Product Overview
Pneumatic pump mechanism, 32 ounce (.9L) polyethylene container. Free turning spout is type 316 stainless steel. 96" (245 mm) long vinyl tubing attaches to anti-slip foot pump. Dispenses surgical soaps, antiseptic solutions and synthetic detergents.
Specification
Foot Operated Soap Dispenser shall be made up of the following components:
• Rotatable spout fabricated of Type 316 Stainless Steel
• Soap container fabricated of chemically resistant polyethylene
• Neoprene foot pump with anti-slip base
• Air tubing: 96" [2438] of vinyl
• Wall bracket ABS plastic with mounting screws
• Dispenser valve housing with check valve made of chemically resistant ABS plastic
Installation
Unit is surface mounted to wall or partition using No 10 self tapping screws (supplied) through holes provided in
wall bracket into metal inserts in valve housing. For maximum usability and compliance with ADA Accessibility
Guidelines, install unit so that spout is 48" [1219] MAX AFF or 46" [1168] AFF MAX with side reach over an
obstruction (e.g.: vanity). Recommended installation is 42" [1066] AFF or 16" [406] maximum above wash basin.
Operation
Soap is dispensed when the foot pump is depressed until reservoir is empty. Check valve prevents siphoning. The
soap spout swings freely over 180° thereby allowing manual repositioning for easy use. Unit is reloaded by
unscrewing soap tank from valve housing. Translucent tank continuously indicates soap level and may be refilled at
any time although soap will continue to feed properly until empty. Tank supply is refilled manually on cycle
determined by maintenance needs.
Overall Size
4 1/2" x 11 1/2" x 9" (115 x 290 x 230 mm) spout projection.
PRODUCT OVERVIEW
Product Overview
Pneumatic pump mechanism, 32 ounce (.9L) polyethylene container. Free turning spout is type 316 stainless steel. 96" (245 mm) long vinyl tubing attaches to anti-slip foot pump. Dispenses surgical soaps, antiseptic solutions and synthetic detergents.
Specification
Foot Operated Soap Dispenser shall be made up of the following components:
• Rotatable spout fabricated of Type 316 Stainless Steel
• Soap container fabricated of chemically resistant polyethylene
• Neoprene foot pump with anti-slip base
• Air tubing: 96" [2438] of vinyl
• Wall bracket ABS plastic with mounting screws
• Dispenser valve housing with check valve made of chemically resistant ABS plastic
Installation
Unit is surface mounted to wall or partition using No 10 self tapping screws (supplied) through holes provided in wall bracket into metal inserts in valve housing. For maximum usability and compliance with ADA Accessibility Guidelines, install unit so that spout is 48" [1219] MAX AFF or 46" [1168] AFF MAX with side reach over an obstruction (e.g.: vanity). Recommended installation is 42" [1066] AFF or 16" [406] maximum above wash basin.
Operation
Soap is dispensed when the foot pump is depressed until reservoir is empty. Check valve prevents siphoning. The soap spout swings freely over 180° thereby allowing manual repositioning for easy use. Unit is reloaded by unscrewing soap tank from valve housing. Translucent tank continuously indicates soap level and may be refilled at any time although soap will continue to feed properly until empty. Tank supply is refilled manually on cycle determined by maintenance needs.
Overall Size
4 1/2" x 11 1/2" x 9" (115 x 290 x 230 mm) spout projection.TECHNICAL SPECIFICS
64
